WPC Door With Frame Exporter introduced that the production process of wood plastic door is mainly to mix wood ultra-fine powder and polymer resin, and then mold it! The wood-plastic door thus produced combines the high-quality properties of wood and plastic! In addition, this production method avoids the step of using glue for bonding, so no harmful substances such as formaldehyde, benzene, ammonia, trichloroethylene, etc. are generated! It can be said that the wood plastic door is a very good new green door! Of course, the formula system of the wood-plastic door is still equipped with a certain proportion of auxiliary materials, such as stabilizers, foaming agents, modifiers, etc. These components are mixed in a certain proportion, which can effectively ensure the quality and performance of the foamed board. Because the material and production process are relatively special, the wood-plastic door has many excellent characteristics! The first thing to talk about is environmental protection, which has actually been introduced just now! The raw materials used in the wood-plastic door are all formed at one time under high temperature, high pressure and vacuum conditions, which do not contain a little formaldehyde! In the secondary processing, a paint-free thermal transfer technology is also used, which will not generate and release Any toxic and harmful gas! How can such a product not be environmentally friendly? Secondly, the wood plastic door has the advantages of "five defenses". The so-called "five defenses" refer to waterproof, moisture-proof, anti-corrosion, mildew-proof and insect-proof! We have already said at the beginning that the material of the wood-plastic door has almost all the high-quality characteristics of wood and plastic, so the "five-proof" capabilities such as waterproof and moisture-proof are naturally the same! Such huge advantages also make wood plastic doors widely used For special venues such as storage rooms, toilets! Last but not least, the thermal insulation and sound insulation performance of wood-plastic doors is quite good! The material used in the wood-plastic door has uniform and fine cells, as well as a unique row cavity structure. Therefore, the thermal conductivity of wood-plastic doors is much lower than that of plastic materials, and the sound insulation and noise reduction effect is also very obvious! In short, the production process of wood-plastic doors is relatively complicated, but the finished products produced in this way are naturally "full"able warrior", with a variety of high-quality characteristics. Through the above introduction, WPC Bathroom Doors Suppliers hopes that you can simply refer to the content of this article in future use. https://www.wpcdoorwallboard.com/

The wood-plastic door is made of wood ultra-fine powder and polymer resin mixed by a molding process. It has both the excellent characteristics of wood and plastic. In winter, the heating is generally turned on in the room. If the room is particularly dry, it will have a certain impact on the use of WPC doors. WPC panels doors Suppliers introduce the maintenance knowledge of WPC doors : 1. In winter, keep the indoors well ventilated, keep the wood-plastic door in a normal temperature and humidity environment, and prevent the wood-plastic door from being deformed due to excessive humidity and temperature difference, metal fittings rusting, edge sealing, and fading materials falling off. Especially when using electric heaters or other heating equipment in winter, keep away from the wood-plastic door to avoid thermal deformation of the wood-plastic door. 2. Do not hang heavy items on the door, and also avoid sharp objects from bumping and scratching. When opening or closing the door, do not use excessive force or hit the wood-plastic door. 3. Do not open the door lock with wet hands, or splash corrosive solvents on the wood-plastic door and door lock. Do not use excessive force when opening the door lock or turning the door lock handle. Hinges, door locks, and other frequently moving hardware accessories should be tightened immediately when they are loose. 4. When removing stains on the surface of the wood-plastic door, you can use it to wet it with air and wipe it with a soft cloth. Hard cloth is easy to scratch the surface. If the stain is too heavy, you can use neutral detergent, toothpaste, or a special cleaning agent for furniture. After decontamination, wipe it clean immediately. Through the above introduction,WPC material door manufacturer hopes that you can simply refer to the content of this article in future use. www.wpcdoorwallboard.com